Our Favorite Creality 3D Printer Drops to All-Time Low Price for Cyber Monday
The Creality Ender 3 S1 Pro is at the top of our list of the best 3D printers, and for good reason.The FDM printer boasts great print quality, automatic bed leveling, direct drive, and an all-metal hot that rises to 300 degrees Celsius. It offers a set of premium features such as End. It doesn’t matter if the output isn’t great, but in our testing, the prints we got were amazing, even with difficult materials like TPU.
Normally, you’d have to shell out around $499 to get Creality’s premium printer, but on Cyber Monday, Amazon Only $369 (opens in new tab) After clicking the coupon. Note that multiple sellers have his $399 printer. However, only the listing I linked here has his $30 coupon in addition. It’s a premium 3D printer, easy enough for beginners, flexible enough for professionals, and currently priced well enough for almost everyone.
When I reviewed the Ender 3 S1 Pro, I appreciated not only its excellent output, but also its ease of use. Assembling the printer took only 15 minutes. This is a big difference from other printers that often take an hour or more because there are only a few bolts to tighten.
Speaking of setup, the Ender 3 S1 Pro uses a CR touch sensor for automatic bed leveling, so the system has to tap 16 different points on the bed to use as the nozzle hovers to each position. Create a map of some z-height. This is a big improvement over other printers, such as the popular Creality Ender 3 V2, which require manual adjustment of each corner of the bed using hand screws.
The build plate that ships with the Ender 3 S1 Pro is a PEI coated steel flex plate that allows for easy print removal. Easy to put on and take off as it sticks to the bed with a magnet.
However, in the Creality Ender 3 S1 Pro, the Creality Sprite Extruder and its all-metal hotend are the true stars of the show. This extruder uses a dual gear direct drive system that provides a better path for your filament than cheaper model Bowden style extruders.
The hotend itself can heat up to 300°C when many competitors top out at 250 or 260°C, which is a huge advantage. This extra heat and direct drive path allows the use of TPU filaments as well as standard PLA and PETG. type.
I used Matterhackers Translucent Green TPU to print this plant model. As you can see in the photo below, it looks very luxurious. TPU allows you to create flexible models.
With a printing surface of 220 x 220 x 270 mm, you can print a reasonably large model. For example, this Twisted Cloud Vase fills the entire space and looks great.
The Creality Ender 3 S1 Pro is an incredible bargain $369 (opens in new tab)But if you want to keep your costs down or increase your build volume, check out our list of the best Cyber Monday 3D printer deals.
