Installing RAM in your PC is probably the easiest task. PC build, and there are also easy upgrades you can do later to add more performance. With more RAM, you can run more software smoothly, edit videos, open more browser tabs, and play video games.
RAM is effectively short-term memory, storing data that needs to be used by programs that are actively using it. More memory allows the CPU to access more data, improving performance. A great way to improve performance. best gaming pc. (If you are not using the desktop, How to upgrade your laptop’s RAM.)
Whether you’re building a PC or upgrading, you need to choose the RAM that works with your motherboard and decide how many sticks you need.
Determine the type (and amount) of memory you need
The type of RAM you need depends on your motherboard. You should check if you are using the latest standard, DDR5, or the older DDR4.Both are still in common use (manuals, product descriptions, or Crucial advisor tools). Another thing to consider is whether the board has two or four slots for memory. Full-size ATX and micro-ATX motherboards usually have four slots, while mini-ITX only has two.
So if you need 32GB of RAM, you can use two 16GB sticks on any of these board types, or four 8GB sticks on a board with four slots. Once you get best ram Move on to the next part of the guide.
Slot Selection for Dual Channel RAM
Most modern motherboards support dual channel RAM configurations. This means there are two 64-bit lanes from memory to the CPU instead of one, which is a big speed boost. To take advantage of dual channel speeds, take two or four RAM sticks and place them in the correct DIMM slots, with half of the memory in one channel and the other half in the other channel should be done.
If you’re installing two DIMMs on a board with four empty slots, you’ll need to check your motherboard manual to see which slots represent channels A and B. Usually this means installing the RAM in the other slot, but check the instructions. Look for diagrams like this.
Once you know which slot to use, you are ready to install.
How to install RAM in your PC
1. Unlock the RAM slot latchSome have boards on both sides of the slot, while others currently have only one. Push down on the latch to make sure it is in the open position.
2. line up the first barYou can see that the motherboard has a notch and the RAM has a divot. These must line up. Otherwise the RAM won’t fit. Make sure the RAM is facing the correct direction. If not, turn around.
3. Place the RAM into the slot. Make sure it is aligned between the latch guides.
Four. Push down on the RAM until it clicks. Two hands may be required. If it’s your first time building, don’t be surprised to find yourself under more pressure than you expected. This process requires a little force.
You should not be able to see the gold contacts. The latch on the side of the RAM slot should pop out and lock the memory in place.
Five. repeat the process On each stick of RAM until done.
If the RAM doesn’t fit, make sure you’re pushing it in with some force. Also, double check that your RAM is facing the right way and that the notches and divots line up.
After installing RAM, you can continue building. For more information, check out our complete guide. how to make a computer.
